AUTO COOLANT LEAK SEALER FULL

AUTO COOLANT LEAK SEALER FULL

Note: Be sure to keep your coolant mixture level is full while using All Weather Seal. All Weather Seal will continue to prevent further leaks and lubricate the water pump. First run we recommend driving for 30 min or more to ensure product is fully mix with your coolant mixture. Leaks usually stop in 2-5 minutes after reaching operating temperature.

Start vehicle with the heater on high, full heat and run the engine to full operating temperature.

Wipe any excess from cap or reservoir neck.You can pre-mix in a bucket before pouring in to help with the mixing process. The product must mix with your existing coolant solution to function correctly. If you have a later model vehicle with no radiator cap, put the Irontite All Weather Seal into the radiator fill reservoir.If the radiator has a cap, put All Weather Seal directly into the radiator.Flushing is not necessary for the product to stop a leak but can help to avoid possible complications. Adding additives to a dirty coolant system may harm the system. We recommend if the coolant is old, dirty or rusty that you flush with and refill with new coolant mixture.Use the appropriate amount for your cooling systems’ capacity.ĬAUTION: ALLOW ENGINE TO COOL so radiator fill cap can be removed safely anytime you are removing the cap. HD trucks may require additional bottles. Gasoline or Diesel Engines.Įasy to use POUR-AND-GO formula! Mixes with ALL antifreeze to stop existing and future leaks.ĭO NOT add to engine oil, transmission or brake fluid.Īctivation happens when both heat and air, under mild pressure, is encountered by the solution. STOP COOLANT LEAKS - Radiator, Head Gasket, Cylinder Head & Engine Block. (Aluminum, Cast Iron, Plastic, rubber, etc.) Formulated to work in the most extreme weather conditions, HOT or COLD.Micro Fibers detect and stop leaks at their source.

Permanently blends with all coolants & types of antifreeze to stop existing and future leaks.

Stops head/intake gasket, radiator, and other coolant system leaks.

Pour-and-Go formula does not require flushing of coolant mixture.

The Ultimate Fix for Head Gasket, Radiator, and other Coolant System Leaks Easy to use - pour directly into the radiator Blends with coolant to permanently stop existing and future leaks Ideal for the most extreme weather conditions - Hot or Cold Lubricates Water Pump Seals

Auto coolant leak sealer